Marine safety equipment is judged on dates and records as much as on condition. Fire safety was the largest area of recorded deficiencies in the Paris MoU region in 2025, at 16.8%, and DNV lists life and rescue boats among the detainable deficiency categories on its classed ships. This calendar puts marine safety equipment on one timeline, so a superintendent can see what falls due across life-saving, fire-fighting and gas detection gear.
The Marine Safety Equipment Calendar
Treat this as a minimum. Maker instructions, flag and class can add to it.
|
When |
Life-saving |
Fire-fighting |
Gas detection and calibration |
|
Monthly |
Crew inspection of life-saving appliances against the checklist |
||
|
Quarterly |
– |
||
|
Annual |
Lifeboat, rescue boat and davit examination and tests; inflatable lifejacket service |
Fire pump flow tests, detection and alarm tests, portable extinguisher examination |
|
|
Every 2 years |
– |
– |
|
|
Every 3 years |
Immersion suit air pressure test; yearly once a suit is over 10 years old |
– |
– |
|
Every 5 years |
Lifeboat overhaul and overload tests; SCBA and EEBD cylinder hydrotest |
||
|
Every 10 years |
– |
Portable extinguisher hydraulic test; CO2 cylinder inspection |
– |
Life-Saving Gear: Who May Do the Work
Since 1 January 2020, Resolution MSC.402(96) has been mandatory for lifeboats, rescue boats, launching appliances and release gear. The annual and five-yearly work must be done by certified personnel of the manufacturer or an authorised service provider, certified for each make and type. Confirm the provider’s authorisation for your equipment and flag before booking. Lifejackets and immersion suits follow the monthly crew routine, with air pressure tests of seams and closures as shown above. Flag rules for older suits differ, so check your flag’s notice.
Fire-Fighting Gear: Dates and Foam
IMO’s maintenance guidelines run from weekly to ten-yearly actions. Portable extinguishers are examined every year by a competent person and hydraulically tested at intervals not exceeding ten years. Fixed CO2 systems follow their own guidelines. Foam is now a survey item as well. From 1 January 2026, foam containing PFOS above 10 mg/kg cannot be used or stored, and existing ships must comply by the first scheduled survey on or after that date. The evidence is a maker’s declaration or a laboratory report
Gas Detection: Calibration Is Not a Bump Test
Under Resolution MSC.581(110), in effect since 3 December 2025, CO2 must read below 0.5% by volume before entry, and detectors should measure CO2 as well as oxygen, flammable and toxic gases. A bump test checks that an instrument responds and alarms. Calibration adjusts it against certified reference gas and is recorded on a certificate. Both matter, and neither replaces the other. We supply matching calibration gas for CO2-capable five-gas detectors, so calibration can be planned in one visit.
Where Ships Lose Time
- Separate lists. Annual, three-yearly and five-yearly items are tracked apart, so one slips.
- Unchecked records. Test dates, certificates and calibration records should be on board and available.
- The wrong provider. Work by someone not authorised for the make and type may not be accepted.
One calendar for all your marine safety equipment, planned around survey windows and port calls, closes each gap. Start by listing every item with its next due date, then group the work by port call so that work on marine safety equipment does not clash with survey season.
How Marine Mechanics Supports Marine Safety Equipment
Marine Mechanics services lifeboats, rescue boats and davits, lifejackets and immersion suits, SCBA and EEBD sets, fixed and portable fire fighting appliances, foam testing and PFOS-free foam supply, and gas detector calibration and supply. Work follows Flag, Class and maker requirements, and is done onboard or at our service station. We support lifeboat and davit servicing on any maker, class and flag through our own team and service partners, and can arrange liferaft servicing through partners on request. We track due dates and prepare documentation for Class, Flag and Port State review.
Three Quick Questions
What counts as marine safety equipment?
Life-saving appliances, fire-fighting appliances and gas detection equipment, each with its own inspection and testing cycle.
Who can service lifeboats and davits?
Certified personnel of the manufacturer or an authorised service provider, certified for each make and type.
When must PFOS foam leave an existing ship?
By the first scheduled survey on or after 1 January 2026.
Marine Mechanics is a technical engineering partner for the full vessel lifecycle. To plan marine safety equipment servicing around your next survey, write to mmsafety@marinemechanics.biz or see our Safety (LSA/FFA) page.

